Hardware computer repair and periodic maintenance can not only be used to fix existing issues but can also help to prevent future problems from occurring. The methods for performing these actions include routine cleaning schedules and other ways of maintaining the systems. Keeping the parts in good shape will allow them to last for quite some time and help prevent untimely failures.
Internal components are known to last for a very long time if properly maintained and this means regular cleanings. Another way of maintaining a PC is keeping the hard drives defragmented by using the tools available in the operating system. Keeping the hard drive maintained will reduce the chances of it failing and causing repairs to be necessary.
Prior to performing any repairs remember to unplug the power from the system first before opening it. Memory is very easy to replace and can be done by following a few easy steps. To remove the memory press down on the clips on either end to release the module and pull it free, next take it to an electronics store to get a replacement.
If a hard drive decides to fail, removing it is a simple task and includes removing the wires and cables from the rear of the drive. Next remove the screws holding the drive in place by using a screw driver. Once the screws are removed the drive is ready to be removed, replacing it involves reversing the removal steps.
Another component that will eventually fail is the motherboard, since these items are a bit tricky to replace it is best to have someone who is experienced perform the repairs. Video cards are a lot less tricky and usually are installed with a single screw. If the card is an AGP model it will have an additional connector in the rear that needs to be released in order to properly remove it.
Case fans are also easy to replace and are done with a screw driver as well, in order to replace the fan the power must be unplugged from it first. This is done by locating the wires that connect the fan and power supply. Once unplugged, use the screw driver to remove the screws holding the fan in place and take it out of the case. To install the new one, replace the screws and plug it back into the power supply then turn on the system to make sure the fan is working.
Ensuring the system kept clean can make not only prolong its life cycle but it can also keep the system running smoothly. Setting a schedule to clean the case out at least one time a month with an air canister or air compressor is an ideal practice to keep. In addition to cleaning out dust and debris from the case it is recommended to run weekly virus scans and also run the defragment program that is standard in the operating system. This will ensure the operating system and hard drive stays healthy and will continue to work with minimal problems.
Performing hardware Computer repair and periodic maintenance can prove to be a challenge if a person is not experienced. If the work is too complex, asking for help is the best idea and can save additional headaches. Always practice safety when working with electronics and be sure to follow all directions.
Internal components are known to last for a very long time if properly maintained and this means regular cleanings. Another way of maintaining a PC is keeping the hard drives defragmented by using the tools available in the operating system. Keeping the hard drive maintained will reduce the chances of it failing and causing repairs to be necessary.
Prior to performing any repairs remember to unplug the power from the system first before opening it. Memory is very easy to replace and can be done by following a few easy steps. To remove the memory press down on the clips on either end to release the module and pull it free, next take it to an electronics store to get a replacement.
If a hard drive decides to fail, removing it is a simple task and includes removing the wires and cables from the rear of the drive. Next remove the screws holding the drive in place by using a screw driver. Once the screws are removed the drive is ready to be removed, replacing it involves reversing the removal steps.
Another component that will eventually fail is the motherboard, since these items are a bit tricky to replace it is best to have someone who is experienced perform the repairs. Video cards are a lot less tricky and usually are installed with a single screw. If the card is an AGP model it will have an additional connector in the rear that needs to be released in order to properly remove it.
Case fans are also easy to replace and are done with a screw driver as well, in order to replace the fan the power must be unplugged from it first. This is done by locating the wires that connect the fan and power supply. Once unplugged, use the screw driver to remove the screws holding the fan in place and take it out of the case. To install the new one, replace the screws and plug it back into the power supply then turn on the system to make sure the fan is working.
Ensuring the system kept clean can make not only prolong its life cycle but it can also keep the system running smoothly. Setting a schedule to clean the case out at least one time a month with an air canister or air compressor is an ideal practice to keep. In addition to cleaning out dust and debris from the case it is recommended to run weekly virus scans and also run the defragment program that is standard in the operating system. This will ensure the operating system and hard drive stays healthy and will continue to work with minimal problems.
Performing hardware Computer repair and periodic maintenance can prove to be a challenge if a person is not experienced. If the work is too complex, asking for help is the best idea and can save additional headaches. Always practice safety when working with electronics and be sure to follow all directions.
About the Author:
Specializing in Computer repair Ottawa, wireless network installation and on-site Montreal Computer repair services in Toronto and Montreal.
No comments:
Post a Comment