Proper management of an electrical system is a basic requirement considering just how a small mistake can turn out to be the cause of a disaster. Malfunctions can be caused by human errors during installation, vandalism or damages from physical elements. The only way out is periodic inspection with the aim or reveling flaws, points of weaknesses and other potential disasters well in advance for early repair. This process does not have to be time consuming and labor intensive as is normally the case when physical testing is done, instead it is prudent to resort to electrical infrared inspection that is highly effective and a significantly cheaper alternative.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
About the Author:
You can visit www.infraredscanningservice.com for more helpful information about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
No comments:
Post a Comment